(Trial functionality – indexing photographs is in work in progress)
- 1950 (20)
- 1952 (2)
- 1955 (3)
- 1957 (2)
- 1958 (26)
- 1959 (8)
- 1960 (3)
- 1961 (3)
- 1962 (8)
- 1963 (7)
- 1964 (3)
- 1965 (3)
- 1967 (1)
- 1968 (2)
- 1969 (1)
- 1970 (2)
- 1971 (1)
- 1972 (1)
- 1973 (11)
- 1974 (1)
- 1975 (19)
- 1976 (4)
- 1977 (1)
- 1978 (7)
- 1979 (1)
- 1980 (29)
- 1981 (1)
- 1982 (1)
- 1983 (7)
- 1984 (1)
- 1985 (6)
- 1986 (1)
- 1987 (7)
- 1988 (1)
- 1989 (1)
- 1990 (10)
- 1991 (5)
- 1992 (13)
- 1993 (11)
- 1994 (6)
- 1995 (27)
- 1996 (30)
- 1997 (27)
- 1998 (8)
- 1999 (4)
- 2000 (56)
- 2001 (25)
- 2002 (2)
- 2003 (19)
- 2004 (8)
- 2005 (101)
- 2006 (29)
- 2007 (30)
- 2008 (49)
- 2009 (36)
- 2010 (97)
- 2011 (24)
- 2012 (14)
- 2013 (15)
- 2014 (63)
- 2015 (70)
- 2016 (382)
- 2017 (2154)
- 2018 (550)
- 2019 (296)
- 2020 (502)
- 2021 (256)
- 2022 (464)
- 2023 (117)
- 2024 (199)
- 2025 (236)
- 2026 (12)
-
A90 A90 Arrival at Sherborne
-
A166Hullabaloo-f50de67e
-
Dinghies 2020-01-Pixie-for-sale-01
-
Dinghies 2020-01-Pixie-for-sale-02
-
Dinghies 2020-01-Pixie-for-sale-03
-
Dinghies 2020-01-Pixie-for-sale-04
-
Dinghies 2020-01-Pixie-for-sale-05
-
Dinghies 2020-01-Pixie-for-sale-06
-
Dinghies 2020-01-Pixie-for-sale-07
-
Dinghies 2020-01-Pixie-for-sale-08
-
Dinghies 2020-01-Pixie-for-sale-09
-
Dinghies 2020-01-Pixie-for-sale-10
-
Dinghies 2020-01-Pixie-for-sale-11
-
Dinghies 2020-01-Pixie-for-sale-12
-
Dinghies 2020-01-Pixie-for-sale-13
-
A90 WillA90-467c7537
-
Jenaka I
-
Classic Boat Awards
-
A1-CB-Awards-Listing
-
A166 Hullabaloo
-
A90 Jenaka III
-
A90 A90 – Trailer Gone !
-
A90 Trestle taking the weight
-
A183 The engine has been partially stripped and painted.
-
1974 R Medway with George 01
-
A90 A90 – On supports
-
20210121_145648-efcf1d29
-
Access to spray booth so looking forward to spraying hatches in varnish
-
20210128_174523-af854796
-
A183 Rusty engine bearers and thrust bearing removed
-
A183 Showing where grub screws were drilled out.
-
A183 This shows the stainless steel plates attached to the rudder head stub tiller by the rather worn machine screw!
-
A183 Some corrosion, but not too bad.
-
A183 Heavily corroded on the inside faces.
-
A85 A85 in the 1970s, Long Island, New York State
-
A85 A85 in the 1970s, Long Island, New York State
-
A85 A85 in the 1970s, Long Island, New York State
-
A85 A85 in the 1970s, Long Island, New York State
-
A85 A85 in the 1970s, Long Island, New York State
-
A183 The keels and all the supporting steelwork were removed for inspection, repair and re-galvanizing.
-
A183 To pull Bluster’s trailer out she had to be jacked up to 1.2 metres above the ground,
-
A183 Having removed the trailer, Bluster was lowered again ready for keel removal.
-
A183 The keels were removed using the procedure in Technical Paper F
-
A183 The remaining keel bolts and pressure plates were removed once the keels were out.
-
A183 Progressively more corrosion lower down the stirrup.
-
A183 Detail of stirrup corrosion, with no corrosion where stirrup was in contact with the keel.
-
A183 Some corrosion where exposed to seawater.
-
A183 The bolts through the keelboxes have been removed, and a start made on the main bulkhead bolts.
-
A183 The backing plates in the keelboxes came out easily, fairly well rusted.
-
A183 Out at last!
-
A183 The lower, outboard corners of the backing plates on the aft side of the main bulkhead were corroded.
-
A183 When removing the keel support steelwork layers of plywood also came off the keelboxes.
-
A183 Laminations of the keelbox plywood worn through close to the keel pivot bolt.
-
IMG_2181-49b2968f
-
IMG_2182-531749c3
-
IMG_2180-aca276a2
-
A155 A155 Miranda is still with us, resting in her owners garden.
-
A5 A5’s new Python drive and prop-shaft 3
-
A5 A5’s new Python drive and prop-shaft 2
-
A5 A5’s new Python drive and prop-shaft 1
-
A124 Neat tufnol discs cover the three holes for bolt removal
-
A124 Alignment for the hole saw on the Port side was a little more awkward, particularly for the pivot bolt.
-
A124 Port – pivot bolt plate hole.
-
A124 Port -upper clamping bolt hole cut.
-
A124 The prepared starboard pivot hole. Oops – forgot to fit the old cover plate removed to cut the whole (corrected before assembly).
-
A124 Hole cut for the starboard upper bolt.
-
A124 Hole for the starboard lower (forward) clamping bolt.
-
A124 After careful alignment (a mixture of measurement and eyeball) a hole saw was used to cut the holes. The thread adjusters are in place.
-
A124 6mm internal to 8mm outer thread converter. The flare at one end usefully bears on the exiting covers to hold them in place.
-
A177 A177 Quinteffence – Stem and centreline repairs
-
A177 A177 Quinteffence – Stem and centreline repairs
-
A177 A177 Quinteffence – Stem and centreline repairs
-
A177 A177 Quinteffence – Stem and centreline repairs
-
A124 New starboard plates fitted over the old ones with the holes in.
-
A124 New port plates fitted over the old ones with the holes in.
-
A124 New starboard plates fitted over the old ones with the holes in.
-
A124 New Cover Design – Mk.2 with thread adjuster to extend thread through new plate
-
A124 New Cover Design – Mk.1 with top-hat style bolts
-
A5 Port water tank
-
A5 Starboard water tank
-
A183 The keel stops removed, with the one remaining (partial) bolt.
-
A183 Engine bearer supports removed, and also the boards sandwiching the lower part of the aft cabin bulkhead.
-
A183 The splits above the lower pintle position have been broken open and re-glued, and new wood inserted to replace missing sections. The skeg may be replaced completely.
-
A183 The upper rudder pintle on the transom was backed by an aluminium plate that had corroded and dissolved the wood behind it. A new piece of Sapelle was scarfed in.
-
A183 Repairs to the bottom laminates under the rudder skeg and the slot in the keel ready for new wood to be scarfed in.
-
A183 The hull laminations peeled back on the port quarter ready to be replaced.
-
A183 A decent boat tent enables work to continue.
-
A5 Cockpit forward bulkhead replacement
-
A102 A102 keel bolt covers
-
A166 A166 2021 Deteriorating on Portland 2
-
A166 A166 2021 Deteriorating on Portland 3
-
A166 A166 2021 Deteriorating on Portland 4
-
A166 A166 2021 Deteriorating on Portland 5
-
A166 A166 2021 Deteriorating on Portland 6
-
A166 A166 2021 Deteriorating on Portland 7
-
2021 May Beer an Natter at The Two Keels
-
A5 20210523_182731
-
A184 Aquilo in Portland Marina – Preparing to recover Aquilo onto her trailer
-
A184 Lining up Aquilo ready to run onto the trailer
-
A184 Aquilo nestled onto the back of the trailer. Collecting winch line from the trailer.
-
Aquilo winched onto her correct position on trailer
-
At top of slip being washed off.
-
A184 Aquilo correctly on trailer. Note aerofoil rudder blade in fully raised position.
-
A184 View from Galley/Navigation area showing comfortable helming position with vertical tiller.
-
A184 Note triangular main shroud support allowing easy mast raising and lowering.
-
A184 Note “V” slots and lines of rollers for Aquilo’s keels to ensure correct positioning of Aquilo when recovered.
-
A183 Port Side Repairs
-
A183 Repairs to the hull and deck around the rubbing strake on the starboard quarter.
-
A183 Where the aft deck shell meets the cockpit deck shell the joint had come apart.
-
A89 All ready for the action in the Suffolk Yacht Harbour Classic Regatta
-
A89 New keel slot boards deliver 7.5 knots! They work.
-
A89 Colchide is visited by a cousin
-
A89 Same factory, different concepts. Both remarkable!
-
A183 The aft deck has come away from the cockpit side deck.
-
A183 The three deck laminates have been cut back and part of the first layer replaced.
-
A183 The stringers meeting at the aft cabin bulkhead were both loose; the voids were filled with epoxy. The dowels are filling holes where a stanchion base had been bolted through.
-
A183 The first laminate layer back on the deck and hull.
-
A183 The laminates over the curved cockpit corner have been left off for the moment, awaiting some solid wood to be fitted to bolt the stanchion base to.
-
A183 The deck and hull laminates, apart from those covering the cockpit corner, back in place and awaiting fairing.
-
A183 Still plenty more to do on the starboard side!
-
Dinghies Pixie for sale – garage stored for 40 years
-
Dinghies Pixie for sale – garage stored for 40 years
-
Dinghies Pixie for sale – garage stored for 40 years
-
Dinghies Pixie for sale – garage stored for 40 years
-
Southampton Boatshow 2021
-
The Walton Backwaters, July 2021
-
A124 B2EED460-F287-4C37-B5F2-48EF5D8E4A65-1cd61ee5
-
A146 Bermuda-2-67d5bf3d
-
A146 1996 Le Bateau Ivre, Dave and Michelle honeymoon. Note the bowsprit
-
A146 1996 Le Bateau Ivre, Dave and Michelle honeymoon. Note the bowsprit
-
A146 1996 Dave & Michelle
-
20210730_215127-06bbd49c
-
A183 Looking forward.
-
A183 A solid block of Sapele inserted in the cockpit corner for stanchion mounting.
-
A183 The block continues under the stringer to provide more rigidity.
-
Note the complete replacement of the laminated backrest.
-
A183 The rotten parts of the aft bulkhead were cut away down to the level of the lower section.
-
A183 The replacement piece for the bulkhead, the backing board, covering strip and part of the forward board.
-
A183 The new bulkhead glued and screwed in place. The forward board is in two parts.
-
A183 These had rotted from the bottom and let water into the plywood bulkhead.
-
A183 The rotten deck and hull laminates around the rubbing strake have now all been replaced.
-
A183 Water had entered via the chain plate bolts and partially rotted the stringer behind the hull-deck join.
-
A183 Preparing to scarf new wood into the stringer where the rusted chain plate bolts passed through it.
-
AOA Brochure – Why we and the boats are so great!
-
AOA Brochure – Why we and the boats are so great!
-
A102 Back to the water
-
A102 Raising the mast (singlehanded – it is simple with the raised chainplates)
-
Scan_20210824 (5)
-
2021 SBS Information Boards
-
2021 SBS Information Boards
-
2021 SBS Information Boards
-
2021 SBS Information Boards
-
2021 SBS Information Boards
-
A1 Atalanta and her towing chum
-
The slipway and creek
-
Paynes Boatyard – an orderly haven
-
Ready for lifting
-
The tractor and manual hoist
-
A chain hoist at each end of the strops
-
Threading the hoist past trailer
-
Chain hoists in operation
-
Flying high!
-
Paynes Boatyard – an orderly haven
-
Leaving the yard for the slipway
-
En route
-
At the top of the slip
-
Clearing the slipway before the descent
-
…going down
-
The three wise men look on while the skilled do the job
-
Waiting for the tide ..
-
Mike walks the plank
-
The water doesn’t take long to arrive
-
The Sussex Coastal Path crosses the launching creek…
-
.. for which the bridge may be withdrawn
-
Open to the sea
-
And she’s away!
-
Slalom through the withies and Atalanta is away
-
The launch site at high tide.
-
66 years after her build just down the river A1 on show
-
a1atsbs
-
The bleak view forward…
-
Old friends – Jeremy, nephew of Alan whose ‘Sujanwiz’ was much of the inspiration for the Atalantas
-
Old friends – Jeremy, nephew of Alan whose ‘Sujanwiz’ was much of the inspiration for the Atalantas
-
The AOA were positioned alongside the OGA (Association for Gaff Rig Sailing). The OGA boat was the marvellous Golant Gaffer, ‘Satellite’.
-
Well, apart from Joile Brise
-
Alistair Currey visited. His father was Charles, olympic sailor and lynch pin of Fairey Marine
-
“Wake up skipper, the dinghy’s awash”
-
A5 A5 Cockpit Seats
-
A5 A5 Cockpit Seats
-
A5 A5 Cockpit Seats
-
A5 A5 Cockpit Seats
-
T8 1966 The World Cup – not as good as sailing
-
2021 Southampton Boat Show – Core Contacts
-
A15 Artemis II Aft Cabin
-
A15 Artemis II in slings – note the aft deck and rudder
-
A15 Artemis II main cabin
-
A15 Artemis II with her raised aft deck
-
RRS Discovery
-
Fairey Duckling
-
Bosham
-
A49 A049 2021 10 Terrapina rotting in Cheshire 001
-
A49 A049 2021 10 Terrapina rotting in Cheshire 002
-
A49 A049 2021 10 Terrapina rotting in Cheshire 003
-
A49 A049 2021 10 Terrapina rotting in Cheshire 004
-
A49 A049 2021 10 Terrapina rotting in Cheshire 005
-
A49 A049 2021 10 Terrapina rotting in Cheshire 006
-
A49 A049 2021 10 Terrapina rotting in Cheshire 007
-
A49 A049 2021 10 Terrapina rotting in Cheshire 008
-
A49 A049 2021 10 Terrapina rotting in Cheshire 009
-
A49 A049 2021 10 Terrapina rotting in Cheshire 010
-
A49 A049 2021 10 Terrapina rotting in Cheshire 011
-
A49 A049 2021 10 Terrapina rotting in Cheshire 012
-
A49 A049 2021 10 Terrapina rotting in Cheshire 013
-
A49 A049 2021 10 Terrapina rotting in Cheshire 014
-
A49 A049 2021 10 Terrapina rotting in Cheshire 015
-
A49 A049 2021 10 Terrapina rotting in Cheshire 016
-
A49 A049 2021 10 Terrapina rotting in Cheshire 017
-
A49 A049 2021 10 Terrapina rotting in Cheshire 018
-
A49 A049 2021 10 Terrapina rotting in Cheshire 019
-
A49 A049 2021 10 Terrapina rotting in Cheshire 020
-
A49 A049 2021 10 Terrapina rotting in Cheshire 021
-
A49 A049 2021 10 Terrapina rotting in Cheshire 022
-
A49 A049 2021 10 Terrapina rotting in Cheshire 023
-
A49 A049 2021 10 Terrapina rotting in Cheshire 024
-
A49 A049 2021 10 Terrapina rotting in Cheshire 025
-
A49 A049 2021 10 Terrapina rotting in Cheshire 026
-
A49 A049 2021 10 Terrapina rotting in Cheshire 027
-
A49 A049 2021 10 Terrapina rotting in Cheshire 028
-
A49 A049 2021 10 Terrapina rotting in Cheshire 029
-
A49 A049 2021 10 Terrapina rotting in Cheshire 030
-
A49 A049 2021 10 Terrapina rotting in Cheshire 031
-
A49 A049 2021 10 Terrapina rotting in Cheshire 032
-
A49 A049 2021 10 Terrapina rotting in Cheshire 033
-
A49 A049 2021 10 Terrapina rotting in Cheshire 034
-
A49 A049 2021 10 Terrapina rotting in Cheshire 035
-
A49 A049 2021 10 Terrapina rotting in Cheshire 036
-
A49 A049 2021 10 Terrapina rotting in Cheshire 037
-
A49 A049 2021 10 Terrapina rotting in Cheshire 038
-
A49 A049 2021 10 Terrapina rotting in Cheshire 039
-
A49 A049 2021 10 Terrapina rotting in Cheshire 040
-
Screenshot_20211024-171754-a41cd0a2
-
Screenshot_20211024-171754-3498b8e5
-
Elle loaded – heading for Apuldram
-
Neighbours
-
Manoeuvring
-
Cradle lift set up
-
Trailing an Atalanta with a Land Rover in the 1960s
